Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit - Manual (Page 31)

Publication 1408-UM001B-EN-P - May 2008 31
Explicit Messaging Chapter 4
Example 2: Read Min/Max Log for Average Current
This example explains how to configure the Log Request Table to
read the Min/Max log for Average Current.
Refer to Min/Max Parameter List on page 84 for the specific record to
return.
In this example, Average Current is record 4.
1. Create a write message to write the following values to the Log
Request Table.
2. Create a read message to read the values in the Min/Max Log
table.
Element Item Name Value
0 Selected Log 2
1 Chronology of Auto Return Data 0
2 Mix/Max Record to be Returned 4
3 Number of Unit Status Records 0
4 Number of Energy Log Records 0
5 Number of Time of Use Log Records 0
6 Number of Load Factor Log Records 0
7 Load Factor or TOU Record to be Returned 0