Rockwell Automation 1606-XLS240-UPS Power Supply Reference Manual - Manual (Page 18)

All parameters are specified at 24V, 10A output load, 25°C ambient and after a 5 minutes run-in time unless noted otherwise.
It is assumed that the input power source can deliver a sufficient output current.
18 Rockwell Automation Publication 1606-RM036A-EN-P — April 2014
Bulletin 1606 Switched Mode Power Supplies
20. Safety
Output voltage SELV IEC/EN 60950-1
PELV EN 60204-1, EN 50178, IEC 60364-4-41
Max. allowed voltage between any input, output or signal pin and ground:
60Vdc or 42.4Vac
Class of protection III PE (Protective Earth) connection is not required
Isolation resistance > 5MOhm Power port to housing, 500Vdc
Dielectric strength 500Vac Power port to signal port
500Vac Power port / signal port to housing
Touch current (leakage current) The leakage current which is produced by the DC-UPS itself depends on the input
voltage ripple and needs to be investigated in the final application.
For a smooth DC input voltage, the produced leakage current is less than 100 μA.
21. Certifications
UL 508 LISTED EE56639 for use in the U.S.A. (UL 508) and Canada
(C22.2 No. 14-95). Industial Control Equipment.
IND. CONT. EQ.
18WM
UL 60950 RECOGNIZED E168663 for use in the U.S.A. (UL 60950-1)
and Canada (C22.2 No. 60950)
Information Technology Equipment, Level 3
GL
EN 60950-1, EN 61204-3 Complies with CE EMC and CE Low Voltage Directives.
ISA 12.12.01, CSA
C22.2 No. 213 RECOGNIZED UNDER FILE NUMBER E244404 for use in the U.S.A.
(ISA 12.12.01) and Canada (C22.2 No. 213)
Hazardous Location Class I Div. 2, Groups A, B, C, D
Marine GL GL (Germanischer Lloyd) classified for marine and offshore
applications. Environmental category: C, EMC2. See below
for link to the Certificate.
CSA C22.2 No. 107.1,
60950-1 CSA Certified under File Number 240020
Marine RINA
RINA (Registro Italiano Navale) certified. See below for the link to
the Certificate.
GOST R
GOST R certification is applicable for products intended for sale and
use within Russia. See below for the link to the Certificate.
C-TICK
C-Tick compliance is for products intended for sale and use
withinh the Australian market. See below for the link to the C-Tick
Declarations of Conformity.
Product certification information (including Certificates and Declarations of Conformity) can be found at www.ab.com/certifications .