Rockwell Automation 1606-XLS240-UPS Power Supply Reference Manual - Manual (Page 21)

All parameters are specified at 24V, 10A output load, 25°C ambient and after a 5 minutes run-in time unless noted otherwise.
It is assumed that the input power source can deliver a sufficient output current.
Rockwell Automation Publication 1606-RM036A-EN-P — April 2014 21
Bulletin 1606 Switched Mode Power Supplies
25. Accessories
Battery Modules
Two pre-assembled battery modules with a single 12V battery are available for different buffer times. As an option,
the mounting brackets are also available without batteries. This option offers more flexibility in selecting an
appropriate battery and can result in savings in shipping and logistics. See individual datasheets for each model.
1606-XLSBATASSY1 1606-XLSBATASSY2
Battery type Standard version
12V, 7Ah High current version
12V, 26Ah VRLA lead-acid maintenance free
battery
Service life 3 to 5 years 10 to 12years According to EUROBAT guideline
Dimensions 155x124x112mm 214x179x158mm Width x height x depth
Weight 3.2kg 9.9kg
DIN rail mountable yes no
Order number 1606-XLSBATASSY1 1606-XLSBATASSY2 Battery module
1606-XLSBATBR1 1606-XLSBATBR2 Mounting bracket without battery
1606-XLSBAT1 1606-XLSBAT2 Replacement battery only
Fig. 25-1 1606-XLSBATASSY1 Fig. 25-2 1606-XLSBATASSY2
1606-XLB Wall / Panel mounting bracket
This bracket is used to mount the DC-UPS units onto a flat surface without a DIN rail. The two aluminium brackets and
the black plastic slider of the DC-UPS have to be removed before you can mount the two surface brackets.
Fig. 25-3 1606-XLB Wall / Panel Mounting Bracket Fig. 25-4 Assembled Wall / Panel Mounting Bracket