Rockwell Automation 1425 PowerMonitor Wireless 250 - Manual (Page 28)

28 Rockwell Automation Publication 1425-UM001A-EN-P - January 2012
Chapter 2 Hardware Installation
2. Verify that the arrow (3) points in the direction of current flow from the
supply (line) to the load.
In the illustration, the label (6) is facing the load.
3. Close the Current Transformer around the cable (1).
Be sure the clip is snapped shut.
4. Use the mounting clip (5) and a cable tie (4) to attach the Current
Transformer to the cable.
Figure 21 - Current Transformer Mounting
Generator
Side
Load
Side
Generator
Side
Load
Side
2
1
6
5
4
3