Rockwell Automation 1394 SERCOS Interface Multi-Axis Motion Control System Installation Manual - Manual (Page 36)

Publication 1394-IN002B-EN-P — February 2004
2-4 1394 SERCOS Interface Connector Data
System Module Connector
Pin-outs The System Module connectors are described in the table below.
System Module connector pin-outs and signal descriptions follow.
System Module Connectors
Description Connector
Present on this 1394
System Module
Main Input Power 4-position connector housing
1394C-SJT05-D /
1394C-SJT10-D
Logic Power 2-position connector housing
Shunt Power 3-position connector housing
Logic, Shunt, and Main Input Power
Terminal Block
8-position terminal block 1394C-SJT22-D
Single Point Bond Bar 5-position grounding bar
1394C-SJT05-D,
1394C-SJT10-D, or
1394C-SJT22-D
Motor/Auxiliary Feedback 13-position connector housing
Relay Outputs 10-position connector housing
Analog Outputs 9-position connector housing
Discrete Input 8-position connector housing (4)
SERCOS Transmit and Receive SERCOS fiber-optic (2)
DPI/SCANport DPI/SCANport