Rockwell Automation 1403-NDNET DeviceNet Communications Card Installation Instructions - Manual (Page 68)

Publication 1403-IN054B-EN-P - August 2001
B-38 DeviceNet Data Tables
Common Services
Instance 32 Attributes (Event log configuration/readback log
select)
Assembly Structure
Common Services
5 Timestamp of last Min/Max reset Int x 4 8 Year 13
Month, Day 14
Hour, Minutes 15
Seconds, Hundredths 16
6 Parameter # being returned Int x 4 8 1 to 84 17
Param # Parameter name Data type #bytes Master Module Range Word No.
Service
Code Service Name
0Ehex Get_Attributes_Single
Attribute ID Access
Rule
Name DeviceNet Data Type
3 Get Data Structure of
6 bytes (3 Words)
Param # Parameter name Data type #bytes Master Module Range Default
Setting Word
No.
1 Password Int 2 -1, 0-9999
Correct password is required to
configure/reconfigure Event log functionality,
but not required to select an Event log
record to be read back in the Event log read
assembly. If the user is only selecting an
Event log record to be read, set password to
–1. 0 1
2 Event log record to
be read Int 2 1 to 100, Specifies a specific Event log
record to be read. 1 = most recent record. 2
3 Enable/disable save
of status input
changes to event
log Int 2 0 = disable
1 = enable 0 3
Service
Code Service Name
0Ehex Get_Attributes_Single