Editing decimal point and multiplier, Editing decimal point and – Rockwell Automation 1420 PowerMonitor 500 User Manual
Page 25
Advertising
Rockwell Automation Publication 1420-UM001D-EN-P - September 2013
25
Unit Configuration
Chapter 3
Editing Decimal Point and Multiplier
When the cursor is beneath the last digit on the left, pressing Exit (6) lets you
change the decimal point and the multiplier (9) (k or M). The blinking ‘dP’
(decimal point) text (10) indicates this capability.
To modify the decimal point position and the multiplier, use the Up and Down
arrow (7) to select the desired value.
10
9
Advertising