Rockwell Automation 1756-EN3TR ControlLogix EtherNet/IP Communication Module Installation Instructions - Manual (Page 5)

5
Publication 1756-IN612B-EN-P - December 2009
Prevent Electrostatic Discharge
About the Module
The module provides EtherNet/IP connectivity. Use the tap to support
linear, star, and device-level ring (DLR) topologies. The module is configured
by default to support linear and star topologies. When setting up a DLR,
follow the steps in the
Use the Module in a Device-level Ring (DLR) Network
section on page 15 to avoid adversely impacting your network.
Refer to the EtherNet/IP Ring Topology Application Guide,
publication
ENET-AP005 , for information on setting up EtherNet/IP
network topologies.
ATTENTION
This equipment is sensitive to electrostatic discharge, which can
cause internal damage and affect normal operation. Follow these
guidelines when you handle this equipment:
•
Touch a grounded object to discharge potential static.
•
Wear an approved grounding wriststrap.
•
Do not touch connectors or pins on component boards.
•
Do not touch circuit components inside the equipment.
•
Use a static-safe workstation, if available.
•
Store the equipment in appropriate static-safe packaging when not in
use.