Rockwell Automation 1756-EN3TR ControlLogix EtherNet/IP Communication Module Installation Instructions - Manual (Page 7)

7
Publication 1756-IN612B-EN-P - December 2009
Software Requirements
You must have the following versions of software.
Before You Begin
Before you install the module, you must install and connect a ControlLogix
chassis and power supply.
20805-M
1 2
Item Description
1 Power supply
2 1756-A4 chassis
Module Software Version
1756-EN2TR RSLinx Classic 2.55 or later
RSLogix 5000 17.0x (supports revision 2 of module firmware only)
If you are using version 17.01 of RSLogix 5000 software, you need to download the
add-on-profile. Download it from
http://www.rockwellautomation.com/support/controlflash/LogixProfiler.asp
or
18 or later (supports revision 2 and later revisions of module firmware)
1756-EN3TR RSLinx Classic 2.56 or later
RSLogix 5000 18 or later