Rockwell Automation 1784-PCIDS DeviceNet PCI Communication Interface Card - Manual (Page 15)

Publication 1784-IN004E-EN-P - April 2005
Chapter
2
Install the 1784-PCIDS Card
Before You Begin
For Information On This Topic Refer To Page
Before You Begin 2-1
Access the Computer’s PCI Local Bus Expansion Slots 2-2
Insert the Card Into the Computer 2-3
Connect to the Network 2-3
WARNING
If you connect or disconnect the communications cable with power
applied to this module or any device on the network, an electrical arc
can occur. This could cause an explosion in hazardous location
installations.
When used in a Class I, Division 2, hazardous location, this
equipment must be mounted in a suitable enclosure with proper
wiring method that complies with the governing electrical codes.
If you insert or remove the card while host power is on, an electrical
arc can occur. This could cause an explosion in hazardous location
installations.
Be sure that power is removed or the area is nonhazardous before
proceeding.