Rockwell Automation 1784-PCIDS DeviceNet PCI Communication Interface Card - Manual (Page 16)

2-2 Install the 1784-PCIDS Card
Publication 1784-IN004E-EN-P - April 2005
To install the card, you need to:
• access the computer’s expansion slots
• insert the card into the computer
Access the Computer’s PCI Local Bus Expansion Slots
To install the card, you must access the computer’s PCI local bus expansion slots. Follow
these general steps, or refer to your computer’s user guide for further instructions:
1. Shut down the host computer.
2. Remove the computer’s cover.
3. Select a vacant PCI local bus expansion slot.
4. Loosen the screw (if present) on the back (rear bracket) of the computer.
5. Remove the slot’s expansion cover.
IMPORTANT
The card’s dimensions are shown below.
4.2 in.
(10.7 cm)
4.72 in. (12 cm)
31536-M