Once you have completed the installation, Register the eds file, Chapter 5 – Rockwell Automation 1784-PCIDS DeviceNet PCI Communication Interface Card User Manual
Page 37: Register the eds file -1, Chapter
Publication 1784-IN004E-EN-P - April 2005
Chapter
5
Once You Have Completed the Installation
Once you have installed the card and driver, you can do the following:
Register the EDS File
You can find the EDS file in the \EDS Files folder on the 1784-PCIDS Driver CD-ROM or
download it from http://www.ab.com/networks/eds/.
Use the EDS wizard in either RSLinx or RSNetWorx for DeviceNet software to register the
EDS file (0001000C00300300.eds) for the 1784-PCIDS card.
• In Windows, select Start ⇒Programs ⇒Rockwell Software ⇒RSLinx Tools
⇒EDS Hardware Installation Tool.
• In RSNetWorx for DeviceNet, select Tools ⇒EDS Wizard....
For Information On This Topic
Refer To Page
Connect a SoftLogix5800 Controller to DeviceNet
Configure the DeviceNet Communication Driver in RSLinx
Software