Rockwell Automation 1784-PCIDS DeviceNet PCI Communication Interface Card - Manual (Page 40)

5-4 Once You Have Completed the Installation
Publication 1784-IN004E-EN-P - April 2005
Configure the DeviceNet Communication Driver in RSLinx
Software
RSNetWorx for DeviceNet uses the RSLinx DeviceNet communication driver to
communicate with the devices on the DeviceNet network. To use this driver you must first
configure the DeviceNet port and driver in RSLinx.
1. Start RSLinx.
2. Select Communications ⇒Configure Drivers.
3. From the list of Available Driver Types, select DeviceNet Drivers and click on
Add/New. You see the DeviceNet Driver Selection screen listing the drivers
available on your machine.