Controller spacing, Din rail mounting – Rockwell Automation 1762-Lxxxxx MicroLogix 1200 Programmable Controllers Installation Instructions User Manual
Page 12
Advertising
![background image](/manuals/579656/12/background.png)
12 MicroLogix 1200 Programmable Controllers
Publication 1762-IN006C-EN-P - September 2009
Controller Spacing
The controller mounts horizontally, with the expansion I/O extending to the right of the
controller. Allow 50 mm (2 in.) of space on all but the right side for adequate ventilation, as
shown below.
DIN Rail Mounting
The maximum extension of the latch is 14 mm (0.55 in.) in the open position. A flat-blade
screwdriver is required for removal of the controller. The controller can be mounted to
EN50022-35x7.5 or EN50022-35x15 DIN rails. DIN rail mounting dimensions are shown
below.
Top
Side
Bottom
A
B
C
Advertising