Rockwell Automation 1769-XXXX Compact I/O Modules - Manual (Page 156)

156 Rockwell Automation Publication 1769-IN088A-EN-P - February 2011
Chapter 3 I/O Memory Mapping
System
Interrupt
Low Clamp Disabled 0 0 0 0 0 0 0 0 0
Enabled 0 0 0 0 0 0 0 0 1
Enable
Channel Disabled 0 0 0 0 0 0 0 0 0
Enabled 1 0 0 0 0 0 0 0 0
(1) These functions are not supported by all controllers, such as MicroLogix 1500, using any configuration method.
Refer to your controller manual for details.
Define Indicate this These bit settings
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Output
Range
Select -10 to +10V dc 0 0 0 0 0 0 0 0 0 0 0 0 0
0 to 5V dc 0 0 0 0 0 0 0 0 0 0 0 0 1
0 to 10V dc 0 0 0 0 0 0 0 0 0 0 0 1 0
1 to 5V dc 0 0 0 0 0 0 0 0 0 0 0 1 1
Output
Data
Select Raw/Proportional
Counts 0 0 0 0 0 0 0 0 0 0 0 0 0
Engineering Units 0 0 0 0 0 0 0 1 0 0 0 0 0
Scaled for PID 0 0 0 0 0 0 1 0 0 0 0 0 0
Percent Range 0 0 0 0 0 0 1 1 0 0 0 0 0
Define Indicate this These bit settings
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0