Import logic components, Safety, Security – Rockwell Automation 20D-DL2-CKS1 Import/Export Project Components User Manual
Page 15: Multiple components, Multiple
![background image](/manuals/579797/15/background.png)
Import and export logic components Chapter 1
Safety
Topic
Consideration
Safety components
limitations while online
Safety components cannot be created, modified or deleted during an online import.
Safety components
limitations while offline
Safety components cannot be created, modified or deleted during an offline import. If a
Safety Signature exists, the project is Safety locked. A non-recoverable safety fault is
present if the Safety Partnership status between the primary controller and the safety
partner is any value other than ‘OK’, or if Safety modify permissions are denied.
Scheduled location
In a Safety project, Safety programs cannot be imported into a Standard task and vice
versa.
Safety programs imported
into a standard project
Safety programs imported into a Standard project are converted to Standard programs
during the import processing and a warning appears in the Errors/Results Pane during
initial parsing of the .l5x file. In this case, imported logic does not verify after import if it
contains instructions that are only valid in a Safety routine.
Controller Fault Handler and
Power-Up Handler
A Safety program cannot be scheduled in the Controller Fault Handler or Power-Up
Handler folders.
Security
Topic
Consideration
Project is secured
If the project is secured, the import process may not be able to create, delete, or modify some
components, depending on the security actions that have been granted or denied for those
components.
Multiple components
Topic
Consideration
Importing multiple User-
defined types (UDTs) and
Add-On Instructions.
When User-defined types (UDTs) and Add-On Instructions are imported using the Multiple
Components option, all UDTs and Add-On Instructions are treated as references. Unlike
child components, referenced components can be configured independently from the
import target.
Controller Fault Handler and
Power-Up Handler disabled
When you import multiple target programs, the Controller Fault Handler and Power-Up
Handler are unavailable in the Schedule In list.
Follow these steps to import logic components. You can import components from
the Controller Organizer and from the Logical Organizer.
Importing components into a controller while online can affect controller operation. Use caution when
modifying logic while online in Remote Run or Run mode.
1. Right-click the item and choose the import component menu item as
described in the following table.
Import logic components
Rockwell Automation Publication 1756-PM019E-EN-E - October 2014
15