Rockwell Automation 20D-DL2-CKS1 Import/Export Project Components - Manual (Page 54)

Chapter 6 Import and export Add-On Instructions
4. Click Collision Details to see any differences in the Add-On Instruction
definition, and to see any changes that will be made to the logic where the
Add-On Instruction is called.
Differences listed in the Property Compare tab are shown in bold in the
Name column.
Tip: The Compare dialog box compares metadata for each instruction definition, such as description, revision, or
edited date. For effective revision control, enter a detailed revision note in the Add-On Instructions
Definition dialog box. To open the dialog box, right-click an Add-On Instruction and click Open Definition.
54 Rockwell Automation Publication 1756-PM019E-EN-E - October 2014