Rockwell Automation 20D-DL2-CKS1 Import/Export Project Components - Manual (Page 52)

Chapter 6 Import and export Add-On Instructions
Import Configuration
When you select a file to import, you use the Import Configuration dialog box to
choose how the Add-On Instruction and referenced components are imported.
If no issues exist, you can click OK to complete the import.
If your Add-On Instruction collides with an Add-On Instruction in the project,
you can:
• Rename it by typing a new, unique name in the Final Name box.
• Choose Overwrite from the Operation menu.
• Choose Use Existing from the Operation menu.
Tip: You can rename an Add-On Instruction only if it has not been sealed with an instruction signature.
To rename an Add-On Instruction that has been source-protected, you need the source key.
52 Rockwell Automation Publication 1756-PM019E-EN-E - October 2014