Rockwell Automation 20D-DL2-CKS1 Import/Export Project Components - Manual (Page 21)

Import and export logic components Chapter 1
For components that do not collide, click Properties for more information on the
component.
Important: A component you select for import that collides with an existing component defaults to overwriting the
project component unless the components are identical, in which case, the project component is used. If the
project component is used, references may still be imported.
Configure multiple component properties
This section describes the settings you use to import and configure multiple
components.
You carry out multiple steps when you import components.
• First, you select components for export from a project.
• You export those components.
• You select those components and import them into another project.
Use one of the following methods to import multiple components.
• Select Import Component from the File menu and choose the component
type that you want to import.
• Copy the programs, Add-On Instructions, or UDTs, right-click a task in
the organizer, and click Paste With Configuration on the menu.
Note: The Paste With Configuration menu option works when copying from the Controller Organizer to the Logical Organizer,
and vice versa.
Rockwell Automation Publication 1756-PM019E-EN-E - October 2014 21