Rockwell Automation 1756-CNB ControlLogix ControlNet Bridge Module, Series E Installation Instructions - Manual (Page 8)

8 ControlLogix ControlNet Interface Module
Publication 1756-IN604A-EN-P - February 2006
Before You Begin
Before you install the module you need to make sure you:
• Know how to handle the module.
Refer to the section Prevent Electrostatic Discharge.
• Have all of the necessary components:
• Know the type of ControlNet network:
There are two types of scheduled traffic networks for ControlNet:
single-keeper networks and multi-keeper networks.
1756-CNB or 1756-CNBR 1756-A4, 1756-A7, 1756-A10,
1756-A13, or 1756-A17 1756-PA72/75 or 1756-PB72/75
Power Supply
1786-TPR,1786 -TPS
1786-TPYR, or1786 -TPYS
(1)
(1) 1786-TPS or 1786-TPYS taps recommended for network connections.
1786-TP (temporary
network connections)
Small Screwdriver (optional)