Rockwell Automation 1761 MicroLogix 1000 Programmable Controllers - Manual (Page 92)

Preface MicroLogix 1000 Programmable Controllers User Manual
4–16
Design
Functional Specification
Perform
Detailed Analysis
Determine if Special
Programming
Features are Needed
Confirm I/O
Addresses
Enter/Edit
Program
Check for
Completeness
Monitor/Troubleshoot
Program
Accept
Program
❏ Prepare a general description of how you want your
automated process to operate.
❏ Identify the hardware requirements.
❏ Match inputs and outputs with actions of the process.
❏ Add these actions to the functional specifications.
Do you need:
❏ Special interrupt routines?
❏ High-speed counting features?
❏ Sequencing Operations?
❏ FIFO or LIFO stack operations?
❏ Make sure I/O addresses match correct input and
output devices.
❏ Enter program using the programming device.
❏ Review your functional specification and detailed
analysis for missing or incomplete information.
❏ Monitor and, if necessary, troubleshoot the
program that you entered.
❏ Resulting programs should match functional
specifications.
Run program.
Program Development
Process
Program Development
Checklist
Create Logic
Program
❏ Use worksheets if necessary to create program.