Rockwell Automation 1791ES-IB16 CompactBlock Guard I/O EtherNet/IP Safety Modules - Manual (Page 10)

10 CompactBlock Guard I/O EtherNet/IP Safety Modules
Publication 1791ES-IN001C-EN-P - September 2009
• Pry open the two gray latches to lock them in the open position.
Hook the module over the top of the DIN rail. Rotate the module
downware until it makes full contact with the DIN rail. Snap the
latches back into place to secure the module to the rail. Verify that the
module is securely attached to the DIN rail.
Module Identification and Dimensions
See the figure for module identification and dimensions.
Module Identification
Hook and rotate module on DIN rail.
Snap latches into place.
44203
77 mm
(3 in.)
195.17 mm
(7.7 in.)
61.4 mm
(2.5 in.)
77 mm
(3 in.)
Front View Side View