Rockwell Automation 1791ES-IB16 CompactBlock Guard I/O EtherNet/IP Safety Modules - Manual (Page 17)

CompactBlock Guard I/O EtherNet/IP Safety Modules 17
Publication 1791ES-IN001C-EN-P - September 2009
Flashing
red Recoverable fault or user-initiated
firmware update in progress The module has detected a
recoverable fault or user-initiated
firmware update is in progress.
Flashing
red and
green Device in self test The module is performing its
power-cycle diagnostic tests.
(1) For recommended action, refer to the user manual that covers these modules.
Network Status Indicator
(1)
State Status Description
Off Module not online or no power The module does not have an IP address.
Flashing
green Module online with no
connections in established state The module has acquired an IP address,
but no connections are established.
Solid
green Module online with connections
in established state The module is operating normally.
Flashing
red One or more I/O connections in
timed-out state or user-initiated
firmware update in progress The module detected a recoverable
network fault, I/O connection timed out, or
user-initiated firmware update is in
progress.
Solid red Critical link failure The module detected an error that prevents
it from communicating on the network,
such as the Ethernet cable is unplugged.
Flashing
red and
green Communication faulted module The module detected a network access
error and is in communication faulted
state. The module received and accepted
an Identity Communication Faulted
Request-long protocol message.
(1) For recommended action, refer to the user manual that covers these modules.
Module Status Indicator
(1)
State Status Description