Remove or replace the module (when applicable), Connect the module channels to the dh-485 network – Rockwell Automation 1756-DH485 ControlLogix Data Highway 485 Module Installation Instructions User Manual
Page 12
Advertising
![background image](/manuals/579951/12/background.png)
12 ControlLogix DH-485 Communications Module
Publication
1756-IN587A-EN-P - September 2005
Remove or Replace the Module (When Applicable)
If you are replacing an existing module with an identical one, and you want to
resume identical system operation, you must install the new module in the
same slot.
Connect the Module Channels to the DH-485 Network
You must use a 1761-NET-AIC Advanced Interface Converter (AIC+) to
connect each channel on the 1756-DH485 module to the DH-485 network.
1
2
POWER
POWER
Push on upper and
lower module tabs
to disengage them.
Slide the module out
of the chassis.
43237
Advertising