Determine module slot location – Rockwell Automation 1756-DH485 ControlLogix Data Highway 485 Module Installation Instructions User Manual
Page 9

ControlLogix DH-485 Communications Module 9
Publication
1756-IN587A-EN-P - September 2005
For information on installing these products, refer to the publications listed in
the table Power Supply.
Determine Module Slot Location
Figure Slot Locations shows chassis slot numbering in a four-slot chassis. Slot
0 is the first slot and is always the leftmost slot in the rack (the first slot to the
right of the power supply). You can use any size ControlLogix chassis and
install the module in any slot. You can also install multiple 1756-DH485
modules in the same chassis. You can install as many modules as your power
supply can accommodate (that is the number for which the power supply is
rated).
Slot Locations
Power Supply
Chassis Type
Chassis
Power Supply
Power Supply
Series B: 1756-A4, -A7, -A10,
-A13, -A17
1756-IN080
1756-PA72
1756-IN078
1756-PB72
1756-PA75
1756-IN596
1756-PB75
Chassis
Power Supply
Slot 0
Slot 1
Slot 3
Slot 2
43235