Rockwell Automation 1788-CNCR ControlNet Daughtercard Installation Instructions - Manual

Publication 1788-IN002C-EN-P - April 2004
Installation Instructions
ControlNet Daughtercard
Catalog Numbers 1788-CNC and 1788-CNCR
This document describes how to install and configure the ControlNet 1788-CNC and
-CNCR daughtercards. In this document, we use the term ‘the card’ to refer to both
daughtercards collectively. When one card is different from the other, we refer to the
daughtercard by name.
If you are connecting the card directly to a ControlNet network, you should also refer to these
publications:
• ControlNet Tap Installation Instructions, publication 1786-5.7
• ControlNet Coax Media Planning and Installation Guide, publication CNET-IN002
For information about See page
Important User Information 2
European Hazardous Location Approval 4
North American Hazardous Location Approval 5
About the Daughtercards 6
Setting the Node Address 7
Installing the Card 8
Daughtercard Performance 8
Connecting the Card to the Network 8
Connect to the Network Using a Tap 10
Connect to the Network Using a 1786-CP Cable 12
Interpreting the Status Indicators 14
Specifications 17