Rockwell Automation 1788-CNCR ControlNet Daughtercard Installation Instructions - Manual (Page 18)

18 ControlNet Daughtercard
Publication 1788-IN002C-EN-P - April 2004
Weight
1788-CNC, 1788-CNCR
0.1 Kg (0.2 lb)
Agency Certification
(when product is marked)
c-UR-us: UL Recognized Component Industrial Control Equipment, certified for
US and Canada
c-UR-us: UL Recognized Component Industrial Control Equipment for Class I,
Division 2, Group A,B,C,D Hazardous Locations, certified for US and Canada
CSA: CSA Certified Process Control Equipment
CSA: CSA Certified Process Control Equipment for Class I, Division 2, Group
A,B,C,D Hazardous Locations
CE
(3)
: European Union 89/336/EEC EMC Directive, compliant with:
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
C-Tick
(3)
: Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
EEx
(3)
: European Union 94/9/EC ATEX Directive, compliant with:
EN 50021; Potentially Explosive Atmospheres, Protection "n" (Zone 2)
CI: ControlNet International conformance tested to ControlNet specifications
(1)
To comply with UL and CSA restrictions, this equipment must be powered from a source compliant with the following: Class
2 or Limited Voltage/Current, as defined in UL 508 Seventeenth Edition Section 32; and Separated Extra-Low-Voltage
(SELV), as defined in CSA C22.2 No 1010, Annex H.
(2)
Use this Conductor Category information for planning conductor routing. Refer to Publication 1770-4.1, "Industrial
Automation Wiring and Grounding Guidelines".
(3)
See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and other certification
details.