Rockwell Automation 1788-CNCR ControlNet Daughtercard Installation Instructions - Manual (Page 9)

ControlNet Daughtercard 9
Publication 1788-IN002C-EN-P - April 2004
Figure 2 1788-CNCR Daughtercard
When you connect the daughtercard to a ControlNet network, you should also refer to this
documentation:
• ControlNet Coax Tap Installation Instructions, publication 1786-5.7
• ControlNet Coax Media Planning and Installation Guide, publication CNET-IN002
See page 14 for information about status indicators.
IMPORTANT
If you use a non-redundant cable system, all ControlNet devices must be
on the same channel, we recommend channel A.
example ControlNet node example ControlNet node
trunk cable A
trunk cable B
example ControlNet node