Rockwell Automation 57C445 AutoMax PC Link Interface Module - Manual (Page 2)

E Copyright Reliance Electric Industrial Company 1993.
V40t is a trademark of NEC Corporation.
IBM PCt is a trademark of International Business Machines, Inc.
ScreenWare2r is a registered trademark of Communication Technology Corporation.
ReSourcet is a trademark of Reliance Electric Company or its subsidiaries.
Reliancer and AutoMaxr are registered trademarks of Reliance Electric Companyăor its
ąąsubsidiaries.
Portions of this work are derived from a copyrighted work of SutherlandĆSchultz Limited.
The information in this user's manual is subject to change without notice.
DANGER
ONLY QUALIFIED ELECTRICAL PERSONNEL FAMILIAR WITH THE
CONSTRUCTION AND OPERATION OF THIS EQUIPMENT AND THE HAZARDS
INVOLVED SHOULD INSTALL, ADJUST, OPERATE, OR SERVICE THIS
EQUIPMENT. READ AND UNDERSTAND THIS MANUAL IN ITS ENTIRETY
BEFORE PROCEEDING. FAILURE TO OBSERVE THIS PRECAUTION COULD
RESULT IN SEVERE BODILY INJURY OR LOSS OF LIFE.
WARNING
THE USER MUST PROVIDE AN EXTERNAL, HARDWIRED EMERGENCY STOP
CIRCUIT OUTSIDE THE PROGRAMMABLE CONTROLLER CIRCUITRY. THIS
CIRCUIT MUST DISABLE THE SYSTEM IN CASE OF IMPROPER OPERATION.
UNCONTROLLED MACHINE MOTION MAY RESULT IF THIS PROCEDURE IS NOT
FOLLOWED. FAILURE TO OBSERVE THIS PRECAUTION COULD RESULT IN
BODILY INJURY.
CAUTION
THIS MODULE CONTAINS STATICĆSENSITIVE COMPONENTS. CARELESS
HANDLING CAN CAUSE SEVERE DAMAGE. DO NOT TOUCH THE CONNECTORS
ON THE BACK OF THE MODULE. WHEN NOT IN USE, THE MODULE SHOULD BE
STORED IN AN ANTIĆSTATIC BAG. FAILURE TO OBSERVE THIS PRECAUTION
COULD RESULT IN DAMAGE TO OR DESTRUCTION OF THE EQUIPMENT.