Rockwell Automation 2705-DN42 DeviceNet Interface Communicaton Board User Manual
Rockwell Automation Equipment
Advertising
2705-DN42
DeviceNet Interface Communication Board
Installation Instructions
This document describes how to install a DeviceNet communications
board.
Overview
•
LED Indicator
•
DIP Switches
•
DeviceNet Connections
•
DeviceNet Components
Installation and Mounting
•
Setting the DIP Switches
•
DeviceNet Termination
Operations
•
Modes of Operation
•
DeviceNet Operations
Troubleshooting
•
Using the LED Indicator
User-Defined Configuration
For more information on the RediSTATION Operator Terminal and
its DeviceNet Configuration refer to Publication 2705-804 on–line at
htpp://www.ab.com.
For more information on the DeviceNet specifications, refer to the
Open DeviceNet Vendor Association at http://www.odva.ors.
Advertising
Table of contents