Rockwell Automation 2711E-xxxx User Manual PanelView 1000e, 1200e 1400e - Manual (Page 135)

5–51 Configuring PanelView Terminals
Publication 2711E-6.17 – November 1998
•
Battery
ĊTests the battery.
• User RAMĊTests the battery-backed RAM. If the terminal loses
power during the test, any retained data and configuration mode
parameters are corrupted and defaults for the corrupted data are
restored.
•
Touch Cells
ĊFor a touch screen terminal. Choose the Touch
Cells button to display the following screen.
The Touch Cell test lets you test 119 touch cells to identify those
that are difficult to activate or inoperable. The 120th cell is
occupied by the OK button, which exits the screen.
Test each touch cell by touching it. A number appears on each
button you touch, displaying the number of times you have
touched it. If the number of times you have touched the button
equals the number that appears in the button, the touch cell is
working. If you find any buttons inoperable or difficult to
activate, or if the number displayed is not equal to the number of
touches, contact your Allen-Bradley Sales Representative.
•
Function Keys
ĊFor a keypad terminal. When you choose the
Function Keys (F4) button from the Terminal Diagnostics screen,
the following screen appears.