Rockwell Automation 2099-BMxxx Kinetix 7000 High Power Servo Drive Installation Instructions - Manual (Page 8)

8 Kinetix 7000 High Power Servo Drives
Rockwell Automation Publication 2099-IN003B-EN-P - August 2013
2. Follow these lifting instructions when mounting the drive to the panel.
3. Install the recommended mounting bolts listed in the table on page 9 .
4. Tighten all mounting fasteners to the value recommended in the table on
page 9 .
IMPORTANT Each Kinetix 7000 drive requires four mounting bolts.
(x2)
1 2
> 1/ 2 A
A
5 ° 4
For 2099-BM09-S and 2099-BM10-S Drives
37.2 kg (82.0 lb)
A = 259.1 mm (10.2 in.)
For 2099-BM11-S and 2099-BM12-S Drives
71.4 kg (157.5 lb)
A = 360.6 mm (14.2 in.)
3