Rockwell Automation 6176M-xxxx Standard Industrial Monitors Installation Instructions - Manual (Page 10)

10 Industrial Standard Monitors
Rockwell Automation Publication 6176M-IN001E-EN-P - August 2012
Mount the 1950M Monitor in a Rack
Follow these steps to mount the 1950M monitor in an EIA-rack cabinet.
1. Position the monitor into a standard 19-inch EIA-rack cabinet (1).
2. Slide the two clips into the first slots on the sides of the monitor (2).
3. Tighten the clips to a torque of 1.1 Nm (10 lb-in.) (3).
4. Slide the remaining clips into the slots on the sides of the monitor (4).
5. Tighten the remaining clips to a torque of 1.1 Nm (10 lb-in.).
TIP For ease of installation, make sure two or more people help to install the monitor.
ATTENTION: The mounting rails that run vertically along the inside edges of the front opening of
an EIA-rack cabinet can be of two types: wide or universal.
•
Wide rails have holes spaced 12.7 mm (0.5 in.) and 31.8 mm (1.25 in.) on centers, in a
repeating pattern. Wide rails are prevalent in Europe.
•
Universal rails have holes spaced 12.7 mm (0.5 in.), 15.9 mm (0.625 in.), and 31.8 mm (1.25
in.) on centers, in a repeating pattern. The universal rails have a hole pattern that contains the
wide pattern but provides an additional hole at the midpoint of the pattern. Universal rails are
prevalent in the United States.