Rockwell Automation 6176M-xxxx Standard Industrial Monitors Installation Instructions - Manual (Page 17)

Industrial Standard Monitors 17
Rockwell Automation Publication 6176M-IN001E-EN-P - August 2012
Connect USB Peripheral Devices
The monitor is equipped with a USB hub that provides communication between your computer
and any USB compatible device such as a keyboard, mouse, or memory stick. The USB hub ports
are enabled only when the monitor is powered on and the connection is made between the type
B connector and the computer.
Connect the Optional Touchscreen Interface
An optional touchscreen provides a high-resolution touch input system. The driver software
included with the monitor lets the touchscreen function with many Microsoft Windows
industrial applications such as a pointing device or mouse.
A touchscreen interface to the computer can be configured using either the serial RS-232
connection or USB connection.
Connecting the Optional Serial RS-232 Touchscreen Interface
The RS-232 DB9 (female) D-shell connector on the bottom side of the monitor provides the
serial touchscreen interface connection to the host.
Follow these directions to connect the touchscreen interface.
1. For units with the touchscreen option, connect one end of the included touchscreen
serial cable to the RS-232 port connector on the monitor.
2. Connect the other end of the cable to a serial port on the host computer.
3. Tighten the captive screws on the cable connector to secure it.
Connecting the USB and Optional USB Touchscreen Interface
The USB Type A connection to the host computer is used to connect USB devices and the
optional USB touchscreen interface to the host computer.
Cat. No. Description
6189V-TCHCBL2 Serial touch cable, RS-232 cable, 1.8 m (6 ft)
6189V-USBCBL2 USB/USB touch cable, Type A to Type B, 1.8 m (6 ft)