Rockwell Automation 6176M-xxxx Standard Industrial Monitors Installation Instructions - Manual (Page 4)

4 Industrial Standard Monitors
Rockwell Automation Publication 6176M-IN001E-EN-P - August 2012
Before You Begin
Before unpacking the monitor, inspect the shipping carton for damage. If damage is visible,
immediately contact the shipper and request assistance. Otherwise, proceed with unpacking.
Keep the original packing material in case you need to return the monitor for repair or transport
it to another location. Use both the inner and outer packing cartons to provide adequate
protection for a monitor returned for service.
Parts List
The monitors are shipped with these items.
•
Industrial Monitors and Accessories CD that contains device drivers
•
Installation instructions (this document)
•
Cutout template (publication 6186M-DS001 )
•
Mounting clips
•
Four VESA mounting screws (M4 x 0.7)
•
Power adapter and line cord (both AC)
•
HD-15 analog video cable
•
RS-232 touchscreen interface cable (for touch-enabled monitors)
•
USB touchscreen interface cable (for touch-enabled monitors)
Required Tools
These tools are required for installation.
•
Panel cutout tools (for panel mount applications)
•
#2 Phillips torque screwdriver