Rockwell Automation 6176M-xxxx Standard Industrial Monitors Installation Instructions - Manual (Page 15)

Industrial Standard Monitors 15
Rockwell Automation Publication 6176M-IN001E-EN-P - August 2012
Monitor Connections
Use the connectors on the rear of the monitor to connect the following:
•
Analog video source (HD-15 VGA connector)
•
Digital video source (DVI connector)
•
Serial port on computer for the optional touchscreen interface
•
USB port on computer for the optional touchscreen interface
•
USB hub device ports for connecting peripheral devices
•
Power (DC input connector must be used with supplied AC power adapter.)
No. Connector No. Connector
1 DVI-D video input 5 DC power input (AC adapter)
2 HD-15 video input 6 USB Type A connection to peripheral
devices (2)
3 USB Type B connection to computer 7 M5 ground screw
4 RS-232 input (optional)
1 2 3 4 6
5 7