Rockwell Automation 2711-PV1000 PanelView 1000 Terminals - Manual (Page 12)

12 PanelView 1000 Terminals
Publication 2711-IN036J-EN-P - November 2009
To connect the AC power to the PV 1000 terminals:
1. Secure the AC power wires to the L1 and L2N screws on the terminal block.
2. Secure the Earth Ground/Protective Earth wire to the screw on the terminal
block.
3. Apply power to the terminal.
ATTENTION
Improper wiring of the power terminals may result in voltage at the
communication connector shells. Refer to the figure below when wiring.
L1 L2
White
(Neutral)
Green
L1 L2
Black
(Line)
Brown
(Line)
Green (Earth
Ground) Green/Yellow
(Protective Earth)
Blue
(Neutral)
120/240V AC, 3 Wire,
U.S. Color Code
120/240V AC, 3 Wire,
European Harmonized
Color Code
Power Terminal
Block (fixed)
To Power Source To Power Source