Rockwell Automation 2711-PV1000 PanelView 1000 Terminals - Manual (Page 6)

6 PanelView 1000 Terminals
Publication 2711-IN036J-EN-P - November 2009
Enclosures
The terminals must be mounted in an environment that provides EN/IEC 61131-2 Pollution
degree 2 protection.
Mount the terminal in a panel or enclosure to protect the internal circuitry. The terminal
meets NEMA Type 12/13 or 4X (indoor use) ratings only when mounted in a panel or
enclosure with the equivalent rating.
Allow enough space within the enclosure for adequate ventilation. Consider the heat
produced by other devices in the enclosure. The ambient temperature around the terminal
must be between 0…55
°
C (32…131
°
F) for PV1000 terminals.
Make provisions for accessing the back panel of the terminal for wiring, maintenance,
installing a memory card, and troubleshooting.
Required Tools
Other than the tools required to make the panel cutout, the tools required for installation are:
•
small slotted screwdriver
•
torque wrench (N•m, lb•in) with slotted or phillips head driver
Mounting Dimensions
The following figures show mounting dimensions for the PanelView 1000 grayscale and color
terminals.
PanelView 1000 Touch Terminal
282 mm
(11.11 in.)
370 mm
(14.58 in.)
6.9 mm
90 mm
(3.54 in.) 112 mm
(4.40 in.)
Top View
6.9 mm
(0.27 in.)