Rockwell Automation 2711-PV1000 PanelView 1000 Terminals - Manual (Page 15)

PanelView 1000 Terminals 15
Publication 2711-IN036J-EN-P - November 2009
ControlNet Protocol
ControlNet Communication Port
Battery Removal and Disposal
The terminal contains a lithium battery, which is intended to be replaced during the life of the
product.
IMPORTANT
When making ControlNet connections, only use the PanelView Channel B for redundant
communications. Connecting Channel B to a Channel A only ControlNet network will
result in:
• the PanelView not being able to communicate over the network
• a PanelView communications fault after several minutes
ATTENTION
PanelView Plus terminals with ControlNet communications ports include a Network
Applications Port (NAP). This port is for temporarily connecting programming terminals
to devices on a ControlNet network, and are not intended for continuous operation.
ATTENTION
The clock module contains lithium. Do not dispose of the battery in a fire or incinerator, or
the clock module may explode. Follow disposal regulations in your area for lithium
battery disposal.
At the end of its life, the battery contained in this product should be collected separately
from any unsorted municipal waste.