Rockwell Automation 2711-PV1000 PanelView 1000 Terminals - Manual (Page 8)

8 PanelView 1000 Terminals
Publication 2711-IN036J-EN-P - November 2009
Clearances
Allow adequate space for mounting, air flow, maintenance, and for installing a memory card
and function key legend inserts.
Installing Terminal in a Panel
To install the PV1000 terminal in a panel:
ATTENTION
Disconnect all electrical power from the panel before making the cutout.
Make sure the area around the panel cutout is clear.
Take precautions so that metal cuttings do not enter any components that may already be
installed in panel.
Failure to follow this warning may result in personal injury or damage to the panel
components.
Memory Card Retainer
90 mm
(3.54 in)
6.9 mm
(0.27 in.)
222 mm (8.73 in.)
is required to
insert and remove
a memory card
with the memory
card retainer.
card
Back Clearance
TERMINAL CUTOUT Use Full
Size Template shipped with
Terminal Front View
Leave 51 mm (2 in.) for
Mounting and Air flow
Leave 51 mm (2 in.) for Mounting, Air
Flow and Legend Insert Leave 51 mm (2 in.) for Mounting
and Wiring Connections Leave 51 mm (2 in.) for
Mounting and Air Flow
Side, Top and Bottom Clearances