Rockwell Automation 2094-SEPM-B24-S Kinetix 6000M IDM Power Interface Module - Manual (Page 3)

Kinetix 6000M Integrated Drive-Motor Power Interface Module 3
Publication 2094-IN016A-EN-P - February 2012
IPIM and IDM Interconnect
Catalog Number Explanation
This publication applies to the following Kinetix 6000M system component.
Software and Firmware Requirements
You must have this version of software/firmware, which can be downloaded from:
http://www.rockwellautomation.com/support/downloads.html
Cat. No. Description
2094-SEPM-B24-S 400V-class IDM Power Interface Module with sercos interface
Product Version
RSLogix™ 5000 20.00 or later. If you are using version 20.00, you need version 1.x of the add-on profile.
Kinetix 6000 1.123 or later
Kinetix 6200 1.045 or later
PORT 1 PORT 2 NETWORK
IDM to IDM Hybrid Cable
(2090-CHBP8S8-12AAxx)
IPIM Module
IDM Unit
IDM Unit
Network Terminator
Last IDM Unit
(2090-CTSRP)
Network Cable
(2090-CNSRPRS-AAxx)
Network Cable to First
IDM
(2090-CNSSPRS-AAxx)
Hybrid Terminator
Last IDM Unit
(2090-CTHP8)
IPIM to IDM Hybrid Cable
(2090-CHBIFS8-12AAxx)
(Catalog numbers are in parenthesis.)