Rockwell Automation 2094-SEPM-B24-S Kinetix 6000M IDM Power Interface Module - Manual (Page 7)

Kinetix 6000M Integrated Drive-Motor Power Interface Module 7
Publication 2094-IN016A-EN-P - February 2012
5. Pivot module downward and align the guide pin on the power rail with the guide pin
hole in the back of the module.
6. Gently push the module against the power rail connectors and into the final mounting
position.
7. Tighten the mounting screws.
8. Repeat the above steps for each module being installed.
Fuse A
ccess
See U ser Manual B
efore Remo
ving
Guide Pin Hole
Rear View Side View
Power Rail
Guide Pin
Pivot module downward
and align with pin.
Power Rail
Bracket Secured in Slot
Flat
2.26 N•m (20 lb•in)