Rockwell Automation 6181X-12TPXPDC Industrial Integrated Computers for Hazardous Locations - Manual (Page 35)

Rockwell Automation Publication 6181X-UM001B-EN-P - May 2011 35
Component Replacement Chapter 4
Install a CF Card in the Internal CF Card Slot
Follow these steps to install a CF card in the internal CF card slot.
1. Disconnect power from the computer.
2. Loosen the screw that secures the CF card slot cover (1), then the screw
that secures the CF card slot lever
(2).
3. Extend the CF card slot lever (3), then pull out the CF card tray (4).
4. Remove the CF card lock screw (5).
If necessary, remove existing CF card by sliding it out of the slot.
5. Insert the CF card into the slot until it is firmly seated (6).
6. Secure the CF card with the CF card lock screw, then reinstall the CF card
tray into the computer.
7. Tighten the CF card slot cover and lever screws.
IMPORTANT Reinstalling the CF card lock screw is required to meet hazardous
locations, mechanical shock, and vibration requirements.
6181X-12TPXPDC Display Computer