Rockwell Automation 6181X-12TPXPDC Industrial Integrated Computers for Hazardous Locations - Manual (Page 49)

Rockwell Automation Publication 6181X-UM001B-EN-P - May 2011 49
Maintenance Chapter 6
Remove the Battery
Follow these steps to remove the RTC battery for proper disposal.
1. Disconnect power from the computer.
2. Remove the rear cover.
3. Remove the battery cover (1).
4. Remove the old battery from its socket (2).
Transporting the Product If you need to ship your computer via common carrier or otherwise transport it to
another location, you must first uninstall the unit from the panel and place it in
its original packing material.
ATTENTION: Do not ship or transport the product when it is installed in a
machine, panel or rack. Doing so may cause damage to the product. You
must uninstall the product and place in its original packing material
before shipping. Rockwell Automation is not responsible for damage
incurred to a product that is shipped or transported while installed in a
machine, panel, or rack.