Rockwell Automation 6181X-12TPXPDC Industrial Integrated Computers for Hazardous Locations - Manual (Page 48)

48 Rockwell Automation Publication 6181X-UM001B-EN-P - May 2011
Chapter 6 Maintenance
Remove Paint and Grease from Bezel
Follow these steps to remove paint and grease from the bezel of computers
properly mounted in NEMA Type 4/4X or IEC IP66 enclosures.
1. Remove paint splashes and grease by rubbing lightly with isopropyl
alcohol.
2. Use a mild soap or detergent solution to remove residue.
3. Rinse with clean water.
RTC Battery This product contains a lithium battery, which is not user replaceable. Return the
computer to Rockwell Automation for battery replacement.
ATTENTION: Make sure the isopropyl alcohol does not come in
contact with the equipment labels. Alcohol may cause the label
printing to smear.
At the end of its life, the battery contained in this product should be
collected separately from any unsorted municipal waste.
The collection and recycling of batteries helps protect the environment
and contributes to the conservation of natural resources as valuable
materials are recovered.