Rockwell Automation 6180 RAC6180 Industrial Computers Installation Instructions - Manual (Page 29)

RAC6180 Industrial Computers 29
Publication 6180-IN001B-EN-P
Replacing the Battery
The RAC6180 contains a battery to maintain the CMOS settings and real-
time clock. The battery is located in a battery holder on the RAC6180
backplane. Replace this battery as needed with a Panasonic battery, part
number CR2032.
ATTENTION: There is a danger of explosion if the
battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the
manufacturer's instructions.