Install the unit – Rockwell Automation 2500 SecureConnect Units for CENTERLINE 2500 Low Voltage Motor Control Centers User Manual
Page 7
Rockwell Automation Publication 2500-IN005B-EN-P - April 2012
7
SecureConnect Units for CENTERLINE 2500 Low Voltage Motor Control Centers
Install the Unit
Follow this procedure to install the unit.
Figure 1 - SecureConnect Label Locations
1. Open the unit door completely and be sure that the unit support pan has
been installed and that the gear opening is toward the front.
ATTENTION: Do not attempt to install or remove a unit when the unit main
switch is in the ON/I position.
Verify that the circuit breaker handle is in the OFF/O position before installing unit.
IMPORTANT
There are two decals on each SecureConnect unit. See
for decal
locations.
Turn Off
Circuit Breaker
Press
Black Button
Move Handle
Gear Opening
Toward Front
Unit Guide Tracks
Gear is locked in
this position.
Unit Support Pan