Rockwell Automation 2500 SecureConnect Units for CENTERLINE 2500 Low Voltage Motor Control Centers - Manual (Page 9)

Rockwell Automation Publication 2500-IN005B-EN-P - April 2012 9
SecureConnect Units for CENTERLINE 2500 Low Voltage Motor Control Centers
5. Make sure the circuit breaker operator handle is in the OFF/O position.
Refer to the CENTERLINE 2500 Low Voltage Motor Control Centers
Installation Instructions, publication
2500-IN001 for more information
about circuit breaker handle positions.
6. To close the door:
a. Press down and hold the locking mechanism of the circuit-breaker
operator handle on the front side of unit door.
b. Place your other hand against the side of the collapsible circuit-breaker
shaft.
Turn Off
Circuit Breaker
Press
Black Button
Move Handle

Circuit Breaker
Operator Handle
Press and hold down the
locking mechanism.