Rockwell Automation 7000 PowerFlex Medium Voltage (B Frame) Commissioning - ForGe (PanelView 550) - Manual (Page 34)

30 Rockwell Automation Publication 7000-IN006B-EN-P - May 2013
Chapter 3 Initial Operator Interface Configuration
• viewing the revision levels of all software in the drive line-up.
• transferring data between the operator interface ‘flash’ memory, ‘flash’
memory card and the drive.
• loading a new language module.
Access the Utility mode from the top-level menu by pressing [F2].
Figure 18 - Utility Operation (configuration) screen
During configuration, the selected value appears highlighted as shown in
Figure 18 . Select a value to edit it.
Changing Backlight Delay
The interface display is backlit. To preserve the life of the lamp, backlighting
automatically shuts off after a period of inactivity on the keypad. Restore the
backlight by pressing any key, which has no other affect on the interface when
pressed with the backlight off.
Figure 19 - Configuring display backlight
IMPORTANT You can abort configuration from any screen by pressing any of the assigned
function keys (other than F1).