Rockwell Automation 7000 PowerFlex Medium Voltage (B Frame) Commissioning - ForGe (PanelView 550) - Manual (Page 37)

Rockwell Automation Publication 7000-IN006B-EN-P - May 2013 33
Initial Operator Interface Configuration Chapter 3
Figure 23 - Configuring meter displays
To change a meter, press
▲
or
▼
to select a meter and press [Enter]. If nothing
happens, you do not have access to this feature. Refer to Configuring Access
Levels on page 194 .Correct the access issues, and press [F8] to continue on this
screen.
See also Selecting a Parameter on page 189 for more information on tag selection.
Complete the selection process to assign the tag to the meter. The meter name
changes to a default string (i.e. V Line) as shown in
Figure 24 for meter 2.
Figure 24 - Configuring meter tags
The text consists of 8 characters and appears on the top level menu with tag value
and units.
To change a meter, press
▲
or
▼
to select a meter and press [Enter]. To modify
the text, press
►
. If nothing happens, you do not have access to this feature. Refer
to Configuring Access Levels on page 194 .Correct the access issues, and press
[F8] to continue on this screen.